Oilless slide guide bearings are self-lubricating bearings that operate without the need for oil or grease. They consist of a sliding surface and a base material, which can be made of various materials, including c86300 alloy, c95400, c93200 material, and more.

High-strength copper alloy provides a high load-bearing capacity. The sliding surface is coated with a solid lubricant, such as graphite or molybdenum disulfide, which provides lubrication for the bearing during operation.

In the process of use, through friction heat to make solid lubrication and shaft friction, the formation of oil, and powder coexist lubrication excellent conditions, not only protect the shaft does not wear and make the solid lubrication characteristics eternal. Its hardness is twice as high as the general copper sleeve, and its wear-resisting performance is twice as high.

At present, the products have been used in metallurgical caster, train support, steel rolling equipment, mining machinery, ships, gas turbines, and other high-temperature, high-load, low-speed, and heavy-load occasions.

1. Before assembly, if lubricating oil is applied to the grinding parts, the running period can be shortened, which is conducive to mechanical operation and operation;

2. During assembly, please wipe the foreign body on the surface and use frozen assembly. If there is no condition, it should be pressed in slowly.

3. After use, the working face is black or gray-black due to the oil film formed by solid lubricant. Please do not scrub and use as usual.

4. It is recommended to use stainless steel or chrome plating on the surface of the grinding shaft when the working environment is corrosive or when it is used in water.