Trusted Oilless Bearings services
L-shaped Self-lubricating Plate – Mould Accessories
Trusted handyman services
L-shaped self-lubricating plate – graphite guide slider, is on the base of high-force brass. A high-performance solid lubrication product inlaid with graphite or MoS2 solid lubricant.
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
L-Gibs For Gib Assemblies
GUIDE RAILS & CENTER RAILS:
Self-Lubricating L-Gibs for Gib Assembly; Made In China; Self-Lubricating, L-Gibs, Gib Assembly
Slide plates consist of highly wear-resistance copper cast alloy whose sliding surfaces are evenly provided with a certain percentage of solid lubricant plugs according to work condition, high-strength copper alloy provides a high load-bearing capacity and the solid lubricant can be formed of low friction film.
Under technical dry running conditions, the bearing surface is designed with a thick running-in film which enables the solid lubricant to be transferred to the counter material at the first contact.
Guide To Oil-free Slide Plates
VIIPLUS oil-free components are produced by embedding a special solid lubricant at appropriate locations.
The metal base material supports the load while the embedded solid lubricant provides lubrication, resulting in superior oil-free durability even under harsh conditions.
Various slide components are as per below:
L-gibs, V-gibs, square gibs, and wear strips are available in solid bronze, self-lubricated, and bronze plated steel. Gib assemblies are available in metric sizes.
When The Graphite Depression Of Guide Plate
Because the guide plate is under the impact pressure when closing the mold up and down, the oil-containing graphite is heated and expanded at the same time, the guide plate working face will form a layer of oil film in the stamping process, so as to play a self-lubricating guiding effect. Therefore, graphite wear subsidence is a normal phenomenon in the process of use. If graphite is not worn for a long time, it can be judged that this kind of guide plate uses graphite as carbon rod, which is not good. Graphite depression is a manifestation of poor production of guide plate, the main reason is that when graphite is inlaid, the graphite is not guaranteed to the end, and the air on the bottom of the hole will run out, thus forming graphite depression. The difference between the two is that the normal graphite wear is generally 1mm lower than the plane, if it is obvious to see or touch the graphite depression, it is the bad graphite depression.
Custom L-gibs & Bronze Wear Plate Manufacture
L-gibs are made of bronze with graphite. Our bronze can be ordered either with or without self-lubricating graphite or pre-drilled mounting holes.
Graphite Plate For Mold And Die
L-shaped self-lubricating plates – Mould spare parts are widely used in various plastic moulds, stamping moulds, hardware moulds, FA automatic machinery moulds, medical, automotive, electrical, stationery, daily packaging, household appliances and aviation and other manufacturing fields.
Gibs and T-Slides > V-Gibs – Solid Bronze with graphite
We’re here to help
We will become your one-stop Wear Plate & Wear Products supplier and deliver the gibs parts in time. Self-Lubricating L-Gibs with and without mounting holes. V-Gibs – Solid Bronze – Self-Lubricating Bronze Parts Size Made to order.
We’re fully protected with the correct equipment
We have all of the regulatory safety certificates
Sliding Mold Components – graphite parts
V-Gibs & L-Gibs For Gib Assemblies, L-Gib Self-Lubricating parts
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
High hardness, wear-resistance, and fully comply with EU ROHS standards. Can provide spectrometer composition test, strength test.
get in touch today
Receive your free quote
“Self-Lubricating L-Gibs provide a long-lasting wear surface for high-production molds using slides and cams. Supplied with no pre-drilled holes, providing”
Basic Information
| Product type | Guide rails | Material | Bronze | Heel | No groove |
|---|---|---|---|---|---|
| Oil groove | Oil-free | Embedded lubricant | Graphite |